TM245P placement machine

Specifically for research and development laboratories, electronic products enthusiasts and small and medium-sized enterprise lines and other units developed a small desktop placement machine. The main features of the machine is small size, placement speed, placement accuracy, simple operation, stable operation. Can be 0402,0603,0805,1206,1210,3528,5050, SOP, etc. for accurate placement.

Basic parameter summary

Maximum placement size

370MM * 450MM (X * Y), two rows of feed 370MM * 390MM (X * Y);

Number of mounting heads

Two

Maximum number of braid stacks

50 (all in the case of 8MM tape) (the left side of the feed tank will be made of standard rear feeding slot matching)

Maximum bulk

IC stack number 10

Full version

IC can be placed in 1 number

The number of pipe stacks

4 (all for SO8 case, vibration Feida optional)

Fastest loading speed

10000PCS/H

positioning accuracy

0.03MM

The fastest moving speed

2M/S(Performance comparable to the servo system)

Support component size

0402-5050, SOP, TQFP, etc., to support the tape width (8MM, 12MM, 16MM, 24MM)

The tape element thickness is less than

3.5MM

Equipment size

L870MM * W685 * H336 (left side, rear row of feed trough), L870MM * W885 * H336

Vacuum pump

Brushless hollow cup silent type, -92KPA

Number of pumps

Three

power supply

220V, 50HZ (can be switched to 110V AC [export])

Average power

160W

weight

Without wrapping about

Placement area:
Only the left side of the feed: the maximum placement area of ​​370mm * 450mm (X * Y)
Left side of the same side of the feed: the maximum placement area of ​​370mm * 390mm (X * Y)
Feeding: the left side of the feed plus the side of the feed, the maximum can reach 50 different materials of the placement, to meet the majority
The demand for electronic products.
Improved point: more types of placement.
Increase IC mechanical appliance.
Improved point: IC correction device, the increase of the appliance to enhance the placement effect
Increase the standard plate mounted IC placement function.
Improve the point: support the disk mounted IC placement, this design to enhance the performance of the machine, more powerful.
Note: If the user has a variety of ICs, contact customization
Special IC tray, can also carry out a variety of IC placement, tray custom costs 300 yuan / time.
Increase vibration to fly
Improved point: support the placement of IC packaging, this design makes the function more powerful.
Note: For the tubular IC more products, you can match the Feida. Optional:
1000 yuan / month, a device can only install one.
Improved positioning:
Yellow mark: fixed positioning bar
Red mark: Movable positioning bar
Blue Marking: Removable Pins, (with a variety of specifications, factory configuration 12) positioning flexibility is not high, can not achieve the best performance.
The biggest highlight of the design is that the placement area can be placed in a number of different products, eliminating the need for frequent refueling of different products. In addition, the positioning of the flexibility to allow the distance between the material and the material to minimize the maximum, improve the efficiency of placement.
Positioning pin positioning bar.
 Feeder improvements:
Improvements: Early product feeders are single, for different products as well as different requirements
Changes are more inconvenient, the design of the biggest bright spot is for each customer according to their own
Circuit board tailored to achieve the best of a placement efficiency.
Electric nylon stripping
The company's patented product, using a feeder configuration of a nylon stripping, can pass control
System interface to adjust the intensity of nylon stripping.
Improve the point: the early use of nylon stripping products using winding, mechanical way to adjust the intensity of life as electric adjustment, winding way every time to clean up the winding inside the nylon. The design of the nylon length requirements of unlimited, more convenient for customers to use.
Screen improvements:
Improvement point: relatively early to the new machine is used
3.2-inch resistive touch screen, 3-generation product upgrade to 7-inch high-definition capacitive touch screen, the operation more convenient. Motor feedback system
Improvement point: early placement machine without drive feedback system, can not detect motor out of step. 3 generations of products joined the X, Y, Z, 3-axis feedback system, the whole process of running the machine no longer out of step phenomenon, external force collision will be able to automatically reset.
High voltage drive system
Improvement point: the early placement machine with ordinary drive module, the motor running speed is limited, 3 generation products
Joined the high-pressure drive system, the whole movement system more than doubled

 

在线预定

Telephone
Product list
Mall